caferemote
NuScale Power, LLC

Fuels Engineer 4

Remote United States Full-time $113K – $178K / year Posted 8 days ago
Apply now
Work from
United States
Contract
Full-time
Salary
$113K – $178K / year
Posted
12 November 2026
Apply by
11 January 2027

The position reports to the Manager, Nuclear Methods and plays a critical role at the intersection of fuel performance analysis, neutronics, transient analysis, and multi‑physics method development. This role requires deep subject‑matter expertise, strong engineering judgment, and the ability to collaborate across Thermal‑Hydraulics, Nuclear Design, Code Development, Engineering, and Operations functions.

NOTE: THIS POSITION IS AVAILABLE FOR REMOTE WORK FOR INDIVIDUALS LIVING BEYOND A 30 MILE RADIUS OF A PHYSICAL NUSCALE OFFICE BUT WITHIN THE CONTIGUOUS UNITED STATES.

About the role

The Fuels Engineer 4 is a senior technical contributor within the Nuclear Methods group of the Nuclear Fuels department. This engineer is a recognized technical authority in fuel thermal‑mechanical (TM) analysis and contributes substantively to the development, qualification, and deployment of advanced methods used for designing and analyzing next‑generation light‑water reactor fuel and supporting reload safety analysis. The Fuels Engineer 4 contributes to strategic technical direction, licensing basis development, and consistent, high‑quality analysis outputs that underpin the safety and performance of the NuScale reactor design.

Responsibilities

  • Serve as a primary technical authority for fuel TM analysis methods, including gap conductance, cladding strain, fatigue, creep collapse, pellet‑cladding interaction, and performance margins.
  • Exercise in-depth knowledge of industry best-practices and state-of-the-art advancements to drive development, qualification, and application of next‑generation fuel performance modeling approaches. Evaluate and incorporate relevant industry advancements, benchmark data, and vendor methodologies into NuScale’s TM framework.
  • Support development of interfacing methods such as neutronics, subchannel analysis, and system thermal-hydraulics.
  • Perform safety analysis calculations using industry-standard and advanced fuel thermal-mechanical simulation tools. Independently evaluate limits and margins for normal operation and DBEs where fuel performance plays a role.
  • Lead planning and execution of software benchmarking, qualification, and QA documentation.
  • Integrate fuel thermal-mechanical methods with other multi-physics modeling and methods development for comprehensive advanced fuels engineering methods.
  • Apply knowledge of next generation LWR fuel designs, modeling strategies, and analysis methods to support product and service strategy development.
  • Work collaboratively within the Nuclear Fuels organization to ensure fuel‑related inputs and outputs are integrated correctly across methodologies. Coordinate interface definition and change control for TM inputs/outputs, shared models, and cross‑discipline analysis frameworks.
  • Provide technical leadership within Nuclear Methods; mentor junior engineers and lead complex analysis tasks in areas of expertise.
  • Contribute to technical development of licensing technical or topical reports, license applications, and other licensing documentation, and participate in licensing interactions including interface with the government regulator in areas of technical responsibility.
  • Prepare and verify engineering reports, calculations, studies, system descriptions, requirement specifications, and other design documents with particular emphasis on fuel performance and neutronics. Work on tasks in multiple and diverse areas.
  • Develop innovative solutions to multifaceted technical challenges requiring original thinking, multi‑physics reasoning, and the ability to navigate uncertainty. Independently frame problems, propose solution strategies, and execute analyses with minimal oversight.
  • Perform other duties as assigned. Flexibly support changing organizational priorities, including urgent analysis needs, cross‑functional reviews, technical troubleshooting, or special studies.

CORE COMPETENCIES: To perform the job successfully, the individual should demonstrate competencies in performing the essential functions of this position by performing satisfactorily in each of these competencies.

  • Problem solving: Identifies and resolves problems in a timely manner, gathers and reviews information appropriately. Uses own judgment and acts independently; seeks input from other team members as appropriate for complex or sensitive situations.
  • Oral/written communication: Listens carefully and speaks clearly and professionally in all situations. Edits work for accuracy and clarity. Is able to create, read, and interpret complex written information. Ability to develop strong interpersonal networks within the organization.
  • Planning/organizing: Prioritizes and plans work activities, organizes personal and project timelines and deadlines, tracks project timelines and deadlines, and uses time efficiently.
  • Adaptability: Adapts to changes in the work environment, manages competing demands and is able to deal with frequent interruptions, changes, delays, or unexpected events.
  • Dependability: Consistently on time and at work, responds to management expectations and solicits feedback to improve performance.
  • Team Building: Capable of developing strong interpersonal networks and trust within the organization.
  • Safety Culture: Adheres to the NuScale Safety culture and is expected to model safe behavior and influence peers to meet high standards.
  • Quality Assurance: Commits to the understanding and implementation of quality assurance regulations, standards and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and NQA-1.

MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES

  • Education: A minimum of B.S. degree in Nuclear, Mechanical, Chemical Engineering (or related discipline) from a four-year accredited college or university is required. Advanced degree in Nuclear, Mechanical, or Chemical Engineering is desirable.
  • Experience: A minimum of 8 years of full-time, directly relevant engineering experience is required. Demonstrated experience in implementing engineering design processes for fuel thermal-mechanical analysis and fuel design is required. Additional experience with neutronics, transient analysis, and related safety analysis is preferred. Experience in core design and neutronics preferred.
  • Industry Requirements: Eligible to work under Department of Energy 10 CFR Part 810.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to understand and communicate clearly using a phone, personal interaction, and computers.
  • Ability to learn new job functions and comprehend and understand new concepts quickly and apply them accurately in a rapidly evolving environment.
  • The employee frequently is required; to sit and stand; walk; bend, use hands to operate office equipment; and reach with hands and arms.
  • Ability to travel nationally and locally using common forms of transportation.

Disclaimer:Employee(s) must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately without causing significant safety threat to self or others. The above statements are intended to describe the general nature and level of work being performed by employee(s) assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all employees in this classification.

NuScale Power, LLC is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status.

Benefits

At NuScale, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department.

For information on employee benefits, please visit our Careers Overview page:Employee Benefits | NuScale Power

Salary

The target pay range for this position is $127,104 - $153,401 annually.The full pay range is $113,955 - $178,237 annually

Discussion

No comments yet. Ask a question or share a tip about this role.

Apply now

More jobs from NuScale Power, LLC

View company →

Contractor - Mechanical Engineer (Plant Systems)

NuScale Power, LLC
Remote United States Contract

NOTE: This is a 40 hour/week contract position expected to last through 2027. Work may be performed remotely within the contiguous United States, with travel…

yesterday Software Development

Contractor - Electrical Engineer (Plant Systems)

NuScale Power, LLC
Remote United States Contract

NOTE: This is a 40 hour/week contract position expected to last through 2027. Work may be performed remotely within the contiguous United States, with travel…

yesterday Software Development

2027 Internships

NuScale Power, LLC
Remote United States Internship

2027 NuScale Power Internship General Interest Application At NuScale, diversity enhances our entrepreneurial, technological and philanthropic spirit. We…

yesterday Software Development

Thermal-Hydraulics Engineer 3

NuScale Power, LLC
Remote United States Full-time $108K – $131K / year

NOTE: THIS POSITION IS AVAILABLE FOR REMOTE WORK FOR INDIVIDUALS LIVING BEYOND A 30 MILE RADIUS OF A PHYSICAL NUSCALE OFFICE BUT WITHIN THE CONTIGUOUS UNITED…

8 days ago Software Development

Similar remote jobs

Browse all →

Cyber Security Engineer

The EDH Global
Remote United States Full-time

The Cyber Security Engineer is a key member of the Team, providing technical expertise and support on a wide range of cyber security projects and initiatives. The ideal candidate should…

2h ago Software Development

Senior Cyber Security Analyst

Boston Government Services
Remote United States Full-time

Boston Government Services , LLC. (BGS) is seeking a Senior Cyber Security Analyst to support our clients. BGS is an engineering, technology, and security firm helping to advance missions…

3h ago Software Development

ADC Expert - Preclinical R&D

mercor
Remote United Kingdom Contract $60 – $100 / hour

About the job Mercor connects elite creative and technical talent with leading AI research labs. Headquartered in San Francisco, our investors include Benchmark , General Catalyst , Peter…

3h ago Software Development

Software Installer - Senior

Peraton
Remote United States Full-time $104K – $166K / year

Responsibilities Join Peraton in advancing the safety, efficiency, and modernization of the National Airspace System (NAS) through the FAA’s Brand New Air Traffic Control System (BNATCS)…

3h ago Software Development

Subject Matter Expert - Crash Course Algebra

Complexly
Remote United States Contract

Subject Matter Expert - Crash Course Algebra When it comes to math, the vast majority of U.S. high schoolers start in the same place: with algebra. It’s a subject that some find curiously…

3h ago Software Development

Senior Salesforce Software Developer

Tripoint Solutions, LLC
Remote United States Full-time $144K – $164K / year

Position Summary The Senior Software Developer is the lead Salesforce developer for a large enterprise Salesforce platform that is moving from Salesforce Education Data Architecture (EDA)…

3h ago Software Development

Get remote jobs the moment they are posted

Choose your categories and skills. We push matching jobs to your device. No email, ever.